About 2000 American workers get work-related eye injuries every day, according to the National Institute of Occupational Safety and Health (NIOSH). These injuries need medical attention. More than thousands of these injuries result in one or more days of missed work, and around one-third of the injuries are treated in hospital emergency rooms.
It is not sufficient to wear any old pair of safety glasses to safeguard your eyes. Although the likelihood of an eye injury diminishes, you increase your risk if your eyewear fits improperly or inadequately.
List Of The Most Common Eye Dangers
Some typical eye dangers include:
- Concrete, dust, and metal fragments.
- Garbage, glass, and construction items that are falling or moving.
- Unpleasant or toxic fumes and smoke.
- Chemicals like acids, bases, fuels, solvents, lime, and wet or dry cement powder).
- Electrical arcing and light when cutting or welding.
- Thermogenic dangers and flames.
- Hepatitis or HIV-infected bloodborne pathogens from bodily fluids and human remains.
- Several frequent eye wounds include:
- Abrasions on the cornea and conjunctivitis (red eyes).
- Embedded in the eye are slivers of glass, metal, or concrete.
- Chemical burns or splashes.
- Flash welder.
- Laceration of the eye.
- Bruises on the face and black eyes.
Safety glasses are frequently treated as “one size fits all” by manufacturers. However, there isn’t a single pair that fits everyone because the head and facial forms vary widely. Therefore, correctly working eyewear is essential to Classes, mainly because 90% of injuries that have been reported result from either employees not wearing eyewear or eyewear that is ill-fitting.
You can find some best fits at caglasses. When eyewear fits comfortably, it enhances compliance and helps prevent injuries, but when it doesn’t, employees frequently remove their eyewear throughout the shift, increasing their risk of eye injuries.
Things to keep in mind before buying glasses
- There are a few points that we should keep in mind before buying safety glasses,
- There shouldn’t be any painful pressure spots behind the ears or on the side of the head.
- The nosepiece should not squeeze your nose when it makes contact with it.
- There shouldn’t be much blocking your vision in either direction.
- To ensure that the total weight of your safety glasses doesn’t interfere with your ability to do duties, the weight should be appropriately divided between your ears and nose.
- Frames ought to be snug enough to fit without catching your eyelashes. Your face and the edges should be separated by little more than the width of a pencil. Gaps that are 6 to 8 mm or fewer are desirable.
- Lenses should cover the eyebrow and any surrounding soft tissue.
- Your eyewear should remain in place when you turn your head side to side and front to back.
- Keep in mind that safety equipment comes in different sizes. If you can’t pass the previous fit test, put on an extra pair of safety glasses until you discover the right fit. You could be preventing an injury down the road.
- Choose the lens hue and coating after deciding on your design. Due to the various working environments, various jobs necessitate different lens coatings for safety eyewear.
- In addition, due to visual problems, such as fogging glasses, many eye injuries occur when workers remove their glasses for a specific activity. Therefore, lens coatings should resist fogging and scratches for the best performance.
Caglasses provide a selection of lens coatings and hues to accommodate various office settings and lighting situations? In addition, UV protection is present in every lens choice.
Any face or eye covering intended to shield the wearer’s eyes from contact with flying objects, dangerous liquids, gases, or other substances that may be detrimental to the eyes is referred to as safety eyewear.
This eye protection can withstand impact and breaking when flying objects or dangerous substances hit.
Glasses, goggles, and face shields with or without prescription lens components are examples of safety eyewear. Carpenters, electricians, machinists, mechanics, plumbers, sheet metal workers, sanders, grinding machine operators, welders, chemical handlers, and laser device/machine operators are a few examples of vocations where safety eyewear should be frequently taken into consideration.
Protective EyeWear Prescriptions & Examinations:
Based on a danger assessment and any other necessary instructions from the Environment, Health & Safety Department, the employee’s department is in charge of providing non-prescription safety glasses.
Employers must ensure that workers who wear corrective lenses either wear eye protection that has the prescription built into the design or wear additional eye protection over their prescription lenses, as daily use of corrective lenses will not provide adequate protection against the majority of the occupational eye and face hazards.
To avoid impeding or limiting the employee’s vision, it is crucial to ensure that the protective eyewear does not interfere with the prescription lenses’ optimal alignment. Additionally, when working in hazardous settings, personnel who use contact lenses are required to wear eye or face PPE.
For exams and prescriptions, workers must visit their eye doctor. What expenses are covered by the insurer and the employee depends on the type of insurance the employee has. The cost of eye exams is the responsibility of the employee. According to the State of Wisconsin contract, the employer will provide prescription lenses and frames, but the employee must have a current eyewear prescription.
Guidance of Choosing Protective Safety Glasses:
- When there is a risk from flying items, the affected employee must utilize eye protection that offers side protection. Using detachable side shields (such as clip-on or slide-on) is permitted.
- When doing tasks that include eye dangers, an employee who wears prescription lenses must wear eye protection that either accommodates the prescription in its construction or may be worn over prescription lenses without interfering with their appropriate positioning.
- Personal protective eye and face gear must be labeled with the manufacturer’s name and adhere to ANSI.
- The worker must use tools with filter lenses with a shade number suitable for the task to guard against harmful light radiation.
- Always use protective eyewear if you operate in a lab where there might be eye dangers. For eye protection, there are several possibilities.
Conclusion
Protection gear, such as personal protective equipment (PPE) for the eyes, face, head, and extremities, protective clothes, breathing devices, and protective shields and barriers, should be offered, utilized, and kept hygienic. Wherever it is necessary, based on the risks of processes or environments, chemical risks, radiological risks, or mechanical irritants encountered in a way that can cause harm or impair the function of any part of the body through absorption, inhalation, or physical contact, appropriate PPE must be provided. Classes stand excellently in all of these criteria.
References:
